Plastic Injection Moulding Service
A wide selection of Injection Moulding materials available.
Injection moulding is a formative manufacturing technology. Almost every plastic part created today is by Injection moulding, as it allows identical parts to be created in huge numbers, in a short space of time, and at very low cost per part.
Whilst the part cost is low, injection moulding has high set up costs, mostly from the cost to make the tools (using CNC) Mould tools range from a few hundred GBP to 6 figures depending on complexity.
The materials used for the tools varies depending on how many parts are to be made and the accuracy required. All thermoplastics can be moulded (a polymer which becomes soft when heated and hard when cooled). Some silicones, and thermoset resins are also possible to mould.
If you require a particular material that is not listed, please contact a Geomiq sales representative or email: [email protected]
Plastic Injection Moulding Materials
Homopolymer, Black 20% glass fibre-UV
Homopolymer, Black UV stabilisted
Acrylonitrile Butadiene Styrene
Polyamide 6 (Nylon)
PA6, Black 30% Glass Fibre
PA6, Natural 30% Glass Fibre
Polyamide 6/6 (Nylon)
PA6/6, Natural 20% Glass
PA6/6, Black 25% Glass
PA6/6, Black 30% Glass Fibre
PC, Black 20% Glass Fibre
PC, Black 40% Glass Fibre
Polyester – Thermoplastic
PBT, Black 15% Glass Fibre
Polyethylene – Low Density
Polyethylene – High Density
Black 40% Glass Fibre
PP, Natural 20% Glass
Polystyrene – General purpose
PS (GPPS), Clear
Liquid Silicone Rubber Materials